Ducati DTL7000 Manual De Instrucciones página 32

English
Owner´s manual
Remove the hitch pin and lock pin, loosen the
bolt securing the resistance rod and sliding the
resistance rod up or down as necessary.
Hitch box
Pin
3) Clutch operation
The clutch engages and disengages the power
from the engine to the transmission.
When the clutch lever is squeezed the clutch
is engaged and power is transmitted. Squeeze
the lever, the tiller will rotate.
When the lever is released, the clutch is
disengaged and power is not transmitted,
release the clutch lever, the tiller will stop.
CAUTION: Reduce engine rpm before
operating main clutch.
(1) Clutch lever
(2) Engaged
(3) Disengaged
4) Gear selection
The transmission can be shifted into the 2nd
forward gear.
The shift lever should be operated in accordance
with the attached gear shifting plate
Gear shifting :
Return the throttle lever to the extreme right.
• Release the clutch lever to disengage the
clutch.
32
Hitch pin
Lock pin
Resistance
rod
• Move the shift lever to the needed gear
position.
NOTE:
If the shift lever will not engage the needed
gear, squeeze the clutch lever and move the
tiller slightly to reset the gears.
5) Use of a hitch box
Install the hitch attachment in the hitch box with
a hitch pin.
(1) Hitch box
(2) Hitch pin
6) Front wheel
Move the tiller on road by the front wheel, lift the
handlebars up and ground the front wheel.
(1) When used in the field
(2) Lock pin
(3) When moved on road
7) Handling Tips
Adjust the handlebar height to a comfortable
position (usually waist height is recommended)
If the machine jerk forward while tilling, press
down the handlebars; if the machine will not
move forward, move the handlebars from side