gala gar MIG 6007 Manual Técnico De Instrucciones página 19

Cooling system included in GALA MIG 6007 power source (434.00.000) which permits MIG/MAG welding
with water-cooled torches. To use this system, the wire-feed unit must have cooling connectors installed. The
main characteristics of the cooling system are:
- Cooling power: 1.2 KW
- Protection system: By means of pressurestat when there is a lack of cooling liquid pressure.
- Effective capacity of tank: 2 L.
1.2. WIRE-FEED UNIT D-22C: Closed wire-feed with roll-cover. Drive motor with two geared 30 mm φ
rollers. Wire speed control. Torch cooling circuit incorporated.
1.3. RECOMMENDED ACCESSORIES.
- Pressure reducing valve for Argon-CO
- Pressure reducing valve for Argon CO
- Shielding gas economiser valve (spotting work) Ref. 355.00.000
- Prof. electronic shield 113 Ref. 811113
- Torch, 600 A / 60%.
FOR THE USE OF ANY OTHER ACCESSORY CONSULT THE MANUFACTURER.
GALA INDUSTRIAL.. Instructions Manual.
TABLE 2.
Basic technical characteristics of the Wire-feed unit D-22C
TECHNICAL CHARACTERISTICS.
No. OF GEARED DRIVING ROLLERS
APPLICABLE WIRE DIAMETERS (mm.)
WIRE REELS
MAXIMUM WIRE SPEED (m/min.)
DRIVING MOTOR
COOLING CIRCUIT OF TORCH
2T/4T PULSATION SYSTEM
MOTOR-SOLENOID VALVE BLEEDING
FINAL WIRE LENGTH CONTROL
ANTI-ARCING RAMP CONTROL
WEIGHT
, EN2 Ref. 376.00.000
2
, EN2 WITH ROTAMETER Ref. 376.00.500
2
Ref. 629.00.000
D-22C
4 x φ30mm
UP TO φ2 mm.
φ300 mm; 20 kg
20 m/min.
24 V =; 65 W
YES
YES
YES
YES
YES
22 Kg.
19