Configuring Remotely Controlled Adjustment Of Active Output Power Level - SMA PLA Option FLX Serie Guia De Instalacion

Setup
2.1.1 Configuring Remotely Controlled
Adjustment of Active Output Power
Level
To configure the remotely controlled Power Level
Adjustment, choose the 'Active power' submenu.
•
Enable the 'Remotely controlled Power Level
Adjustment' radio button.
•
64 possible relay configurations are available.
Illustration 2.2 Configuring Active Power Control – PLA
To proceed with the configuration guide, press 'Next'.
•
•
The value entered is set on each inverter and is the
maximum percentage of nominal active power that the
inverter is capable of delivering.
L00410649-02_2q / Rev. date: 2014-06-20
Per default 4 relay inputs are active.
Follow the information provided by the DNO and
enter the appropriate power level for each relay
state.
2 2
9