SMA PLA Option FLX Serie Guia De Instalacion página 6

Installation
Illustration 1.2 Scope of Delivery: PLA Option
Illustration 1.3 Communication Board - Open Position
To install the option:
1.
2.
3.
4.
5.
L00410649-02_2q / Rev. date: 2014-06-20
On the inverter, open the cover of the installation
area.
Insert the PLA Option into 1 of the 2 option slots;
option slot 1 or option slot 2, see Illustration 1.3.
Fasten with a 'click' on both sides of the option.
Insert the cable gland into the heat sink.
Connect wires from, for example, a remote
control device, see Illustration 1.1.
Fasten wires with cable tie.
1 1
5