MAINTENANCE
6.2.3 E
NGINE
Follow all the instructions in the engine
manual.
To empty the engine oil, unscrew the oil
plug (1). When refitting the plug, make
sure the seal is positioned correctly.
6.2.4 R
EAR AXLE
This is a sealed single unit that does not require maintenance. It is permanently
lubricated and this lubricant does not need changing or topping up.
6.2.5 B
ATTERY
To ensure long life to the battery it is essential to keep it carefully maintained.
The battery on your machine must be charged before you use it for the first
time and, subsequently, if the machine is stored, before you next start up.
– Carefully read and observe the recharging procedure described in the booklet
provided with the battery. Failure in following the procedure or in charging the
battery could permanently damage the battery elements.
– A flat battery must be recharged as
soon as possible.
IMPORTANT
done using a battery charger at constant
voltage. Other recharging systems can
irreversibly damage the battery.
The machine comes with a connector (1)
for recharging, to be connected to the cor-
Recharging must be
EN 39
1
1