Quantum TRU BALANCE 3 Instrucciones Básicas De Funcionamiento página 16


1. Screw 1, 2, and 3
2. Screw 4 and 5
3. Setscrews 1 and 2
4. Armrest Post
1
Figure 9. Flip-up Armrest Height and Angle Adjustment
To adjust the armrest angle:
1. Loosen nut. See figure 9.
2. To set the armrest at the desired angle, adjust the turnbuckle to
raise or lower the armrest.
3. Tighten nut. See figure 9.
To adjust the armrest width:
1. Loosen setscrew 1 and/or 2 on underside of armrest prior to
adjustment. See figure 9.
2. Adjust the armrest width to the desired position by turning screw 4
and/or screw 5. See figure 9.
3. Tighten setscrew 1 and/or 2.
To remove the armrest:
1. Remove the armrest knob. See figure 9.
2. Support the weight of the armrest and pull the armrest off of the
armrest post.
Identification Key
5. Armrest Knob
6. Turnbuckle
7. Nut
2
5 3
4
6
7