Quantum TRU BALANCE 3 Instrucciones Básicas De Funcionamiento página 17

WARNING! Some power chair components are heavy. You may
need assistance to lift or carry them.
To install the armrest:
1. Slide the armrest onto the armrest post. See figure 9.
2. Install and tighten the armrest knob.
To adjust the armrest swing:
1. Flip the armrest up.
2. Remove the screw on the bottom of the armrest and rotate armpad
to gain access to adjustment screws. See figure 10.
3. Set the adjustment screws that correspond to the desized position.
4. Rotate armpad to cover adjustment screws and reinstall the screw
on the bottom of the armrest.
5. Lower the armrest.
1. Screw
A. Swing In
B. No Swing/Fixed
1
Figure 10. Flip-up Armrest Swing Adjustment
Identification Key
C. Swing Out
D. Right Arm
E. Left Arm
D
E
A B

C