Quantum TRU BALANCE 3 Instrucciones Básicas De Funcionamiento página 21

To adjust the armrest height:
1. Remove screws 3 and 4. See figure 14.
2. Slide the armrest up or down the detent bar to the desired height.
3. Reinstall screws 3 and 4. See figure 14.
4. Repeat for the other armrest if necessary.
1. Armrest Lever
2. Screws 1 and 2
3. Armrest Block
5
10-14 IN.
(25.4-35.58 CM)
Figure 14. Heavy Duty Drop-in Armrest Position and Height
Adjustment
Pediatric Single Post Quick Height Adjustable Drop-in Armrests
The Pediatric Single Post Quick Height Adjustable Drop-in Armrests
can be adjusted and easily removed for easier transfer onto and off of
the power chair. The total height adjustment range is 3 in. (7.62 cm) in
3/8-in. (0.95-cm) increments. This range is measured from the top of
the seat pan to the top of the armrest pad. The total height adjustment
range is 7.75-10.75 in. (19.69-27.31 cm).
To remove the armrest assembly:
1. Rotate the armrest lever forward. See figure 15.
2. Lift up the armrest assembly.
To install the armrest assembly:
1. Place the armrest assembly into the armrest block. See figure 15.
2. Rotate the armrest lever rearward.
Identification Key
4. Screws 3 and 4
5. Detent Bar
5
1
2
4
8-12 IN.
(20.32-30.48 CM)
3
