Quantum TRU BALANCE 3 Instrucciones Básicas De Funcionamiento página 20


Heavy Duty Drop-in Armrests
The Heavy Duty Drop-in Armrests are designed to be removed for
easier transfer onto and off of the power chair. See figure 13. The
armrest height and position can be adjusted. See figure 14.
To remove the armrest assembly:
1. Rotate the armrest lever rearward. See figure 13.
2. Lift up the armrest assembly.
To install the armrest assembly:
1. Place the armrest assembly into the armrest block. See figure 13.
2. Rotate the armrest lever forward.
To adjust the armrest position:
1. Rotate the armrest lever rearward and remove the armrest from the
armrest block. See figure 13.
2. Loosen screws 1 and 2. See figure 14.
3. Slide the armrest block to the desired position.
4. Tighten screws 1 and 2.
5. Install the armrest in the armrest block and rotate the armrest lever
forward. See figure 14.
6. Repeat for the other side if necessary.
Figure 13. Heavy Duty Drop-in Armrest Removal/Installation
Identification Key
1. Armrest Lever
1