Lateral Adjustment - Quantum TRU BALANCE 3 Instrucciones Básicas De Funcionamiento



Lateral Adjustment

The laterals can be easily installed and adjusted to different heights and
widths.
NOTE: Laterals should only be installed and adjusted by your
Quantum Rehab Provider.
To install laterals:
1. Install but do not tighten the attachment screws in the lateral track.
2. Slide the lateral support through the channel guide as shown in
figure 24.
3. Slide the lateral support to the desired height and width. See figure 24.
4. Tighten the screws inserted into the lateral track.
5. Repeat for other side, if necessary.
To adjust the laterals:
1. Loosen the attachment screws in the lateral track.
2. Slide the lateral support to the desired height and width. See figure 24.
3. Tighten the screws inserted into the lateral track.
4. Repeat for other side, if necessary.
NOTE: Based on seat height, additional holes may be present/
available to adjust overall height of lateral tracks.