Instructions For Installation - Whale GT0810B Instrucciones De Instalacion Y Uso

• The Grey Waste Tank is designed for the storage of grey waste water in recreational marine vessels. Your warranty may be invalidated if the product is used
in other applications or outside the remit of the standards quoted on the packaging/product literature.
• All pipework must contain a correctly installed anti-syphon valve/loop. (Figure 1)
• The pumped water must be evacuated through a skin fi tting or seacock above the waterline. (Figure 1)
• Do not screw directly to the hull – must be mounted on a bulkhead or an additional board.
• WARNING: Installation must be carried out by a qualifi ed electrician. Improper wiring can cause a fi re resulting in injury or death. Suggested wiring information (Figure
8A and Figure 8B) is given as a guide only, and wiring must comply in accordance with the applicable electrical standards. Appropriate size fuses or circuit breakers
must be installed.
Contact Whale Support +44 (0)28 9127 0531 for specifi c advice on your installation.
6. PARTS
QTY: 1
QTY: 4
QTY: 1
QTY: 4
7.

INSTRUCTIONS FOR INSTALLATION

The grey waste tank is designed for use with grey waste water in recreational marine vessels. Typical installation is shown in Figure 1. For tank dimensions see Figure 2.
260mm (10.3")
250mm (9.9")
250mm (9.9")
Grey Waste Lid with integrated sensor(s)
M4 x 20 screws
Grey Waste Tank
M5 Spring Washers
Figure 1 Typical Grey Waste Tank Installation in Multi Drain Grey Waste System
8ltrs (2.1 US gals) Tank Models
190mm
(7.5")
16ltrs (4.2 US gals) Tank Models
230mm
(9.1")
20ltrs (5.3 US gals) Tank Models
Figure 2 Grey Waste Tank Dimensions
350mm (13.8")
180mm
(7.1")
600mm (23.7")
600mm (23.7")