Imaging Modes; 2D Imaging - FujiFilm SonoLite M-Turbo Guia Del Usuario

You can use the licensed FUJIFILM SonoSite ECG function to display the patient's heart rate and to provide
a cardiac cycle reference when viewing an ultrasound image.
WARNING

Imaging modes

2D imaging

2D options
In 2D imaging, you can select the following on-screen options.
Table 1: 2D options
Control Description
Optimize Settings are as follows:
Res provides the best possible resolution.
Gen provides a balance between resolution and penetration.
Pen provides the best possible penetration.
Some of the parameters optimized to provide the best image include focal zones,
aperture size, frequency (center and bandwidth), and waveform. They cannot be
adjusted by the user.
Adjusts the grayscale range: -3, -2, -1, 0, +1, +2, +3.
Dynamic
Range The positive range increases the number of grays displayed, and the negative range
decreases the number of grays displayed.
Dual Displays side-by-side 2D images.
Select Dual, and then press the
between the screens. With both images frozen, press the
the images.
To return to full-screen 2D imaging, select Dual or press the 2D key.
LVO On turns on Left Ventricular Opacification. LVO Off turns off this option.
LVO On,
LVO Off Use LVO for cardiac exams in 2D imaging mode when using an imaging contrast agent.
LVO lowers the mechanical index (MI) of the system to enhance visualization of the
contrast agent and endocardial border.
This option depends on transducer and exam type.
Select from four image orientations: U/R (Up/Right), U/L (Up/Left), D/L (Down/Left), D/R
Orientation
(Down/Right).
2
Do not use the FUJIFILM SonoSite ECG to diagnose cardiac arrhythmias or to
provide long-term cardiac monitoring.
key to display the second screen and to toggle
UPDATE
key to toggle between
UPDATE
2D imaging