Ecg - FujiFilm SonoLite M-Turbo Guia Del Usuario

ECG

ECG is an option and requires a FUJIFILM SonoSite ECG cable.
WARNINGS
Caution
Notes
To use the ECG
1 Connect the ECG cable to the ECG connector on the ultrasound system, mini-dock, or docking system.
The ECG feature turns on automatically.
Note
2 Select ECG on-screen. (ECG may be on another page. It appears only if the ECG cable is connected.)
3 Select options as desired.
Table 2: ECG on-screen controls
Turns on and off the display of the ECG signal.
Show/Hide
Increases or decreases ECG gain. Settings are 0-20.
Gain
Sets the position of the ECG signal.
Position
4

Do not use the FUJIFILM SonoSite ECG to diagnose cardiac arrhythmias to
provide long-term cardiac monitoring.
To avoid electrical interference with aircraft systems, do not use the ECG
cable on aircraft. Such interference may have safety consequences.
Use only accessories recommended by FUJIFILM SonoSite with the system.
Your system can be damaged by connecting an accessory not
recommended by FUJIFILM SonoSite.
Biopsy guidelines are not available when the ECG cable is connected.
The ECG signal may take up to one minute to restabilize after defibrillator use
on a patient.
The ECG signal may take up to one minute to restabilize after defibrillator use
on the patient.
ECG