Chauvin Arnoux SIMPLE LOGGER II Manual De Usario página 31

English
The main menu, located at the top of the screen, allows access to the following commands:
File
Load Layout: loads a real-time window layout.
Save Layout: saves the current real-time window layout.
Open Configuration: restore the instrument configuration recorded before.
Start recording real-time data: stores real-time trend into a specified database.
Print: prints the active real-time window.
Print Preview: displays the active real-time window as it would look if printed.
Print Setup...: display the print setup dialog allowing the selection of printing options.
Exit: close the control panel.
View
Trend: opens a real-time trend graph window.
Waveform: opens a real-time waveform window.
Harmonic: opens a real-time harmonic bar graph window.
Status: opens an instrument status window.
Instrument
Connect: establishes communication with the device.
Disconnect: terminates communication with the device.
Configure: displays the window of configuration choices for the device.
Download: downloading of recorded data from a device.
Start Recording: if the instrument was stopped, this command starts recording immediately, for the
specified duration; if the instrument was recording, this command stops it.
Set Clock: displays the Date/Time dialog box and allows you to change the date and time of the
attached instrument.
Erase Memory: erases from the instrument all recorded data except its configuration.
Clear Alarms: clears any alarm indications on the instrument and in the status window in the control
panel (the history of alarms is not deleted)
Tools
Channel Trace Colors: allows you to specify the default colors to be assigned to graph traces
associated with specific trend measurements.
Input Trace Colors: allows you to specify the default colors to be assigned to graph traces
associated with specific hardware input channels
Decode Data File: allows you to decode the download.dat file from a previous download, into a
recording database
Window
Cascade: arranges the real-time windows in such a way that they overlap each other and the title bar
for each window is visible.
Tile: arranges the real-time windows such that all of each window can be seen.
Arrange Windows: arranges the real-time windows to a default layout based on the size of the main
control panel window.
♦
Note : in addition, there is a list of all open windows at the bottom of the screen. Selecting
the desired window moves it to the foreground.
Help
Control Panel: display the main Control Panel help topic.
Contents: display the help contents dialog box.
How To: display the How To help topic.
About: displays the About dialog box.
Page 31
®
Simple Logger II DataView