Displaying Information About The Current Status Of The Instrument Connected - Chauvin Arnoux SIMPLE LOGGER II Manual De Usario

English
2.4 Displaying information about the current status of the instrument
connected
This information window is part of the Control panel screen(shown below in figure 2-4).
It can be reduced in the bar at the bottom of the screen, restored to its original size, or closed by action on
the buttons at top right.
Connection:
indicates whether or not a link is established between the instrument and the PC (connected or
disconnected)
Identification (of the instrument):
Model: model identification number;
Serial #: identification of the individual product;
Firmware Rev: version number of the embedded software;
Memory:
Capacity: total quantity of usable memory in the instrument (in bytes);
Used: quantity of memory already used (in bytes);
Page 37
Figure 2-4
®
Simple Logger II DataView