Saving And Restoring The Configuration - Chauvin Arnoux SIMPLE LOGGER II Manual De Usario

®
Simple Logger II DataView
10. indicate, in the corresponding windows, the date and time at which you want recording to start (clicking
on the Reset Date/Time button displays the current date and time plus 60 seconds). The date and time
at which recording will end is set automatically according to the recording duration already chosen;
11. the Memory zone (at top right in this window) indicates the quantity of memory available and the quantity
needed for the parameters requested. Changing the parameters automatically adjusts the quantity of
memory required.
12. when the configuration is complete, it can be saved on your PC (see § 2.3.5. below).
13. to start the session, select OK; after confirmation of the command in a confirmation window, the
configuration information is transmitted to the instrument for recording in accordance with the specified
parameters.
14. recording can also be started immediately by checking the Immediate Recording box; in this case, the
starting date and time configured become invalid and are shaded. Recording starts when the command
confirmation window is closed.

2.3.5 Saving and restoring the configuration

To save time or reproduce a single configuration several times in succession or on several devices, it may be
useful to save one or more configurations in your computer's memory.
Saving the configuration currently displayed:
At the bottom of the configuration window previously opened, click on the Save button;
a new "Save as" window prompts you to select or type a file name, then identify a folder and its
location in the tree; click on Save to terminate the backup.
Restoring a configuration:
If the configuration window is not open, select Configure in the Instrument menu;
a new "Load" window prompts you to type or select a file name from among the files already saved
in the folder at the planned location; click on Load to restore the configuration window with all the
parameters previously recorded.
Reading a configuration:
The Read button of the configuration window can be used to reread the configuration of the
instrument connected.
English
Page 36