Tools And Materials; Before You Begin - Kohler K-306 Guia De Instalacion

Tools and Materials

Pipe Adjustable
Wrench Wrench
Assorted Plumbers
Screwdrivers Putty
Thank You For Choosing Kohler Company
We appreciate your commitment to Kohler quality. Please take a few
minutes to review this manual before you start installation. If you
encounter any installation or performance problems, please don't
hesitate to contact us. Our phone numbers and website are listed on
the back cover. Thanks again for choosing Kohler Company.

Before You Begin

WARNING: Risk of product damage. When using this valve in
a fiberglass or acrylic installation, use the thin wall installation
kit (88526).
CAUTION: Risk of product damage. This valve contains plastic
and rubber components. Do not apply excessive heat to the
valve body when soldering.
CAUTION: Risk of product damage. Do not apply flux or acids
directly to the valve, as damage may result.
CAUTION: Risk of product damage. Do not apply
petroleum-based lubricants to the valve components, as damage
may result.
IMPORTANT! The installer is responsible for installing the valve
and adjusting the maximum water temperature of this valve
according to instructions.
Observe all local plumbing and building codes.
Kohler Co.
Strap Hacksaw or Tubing Cutter
Wrench
Thread Hex
Sealant Wrench
3
Thermometer
1012679-2-C
Propane
Torch
Solder