Open The Main Menu With The Access Code Activated; Metering Mode - Ecolab EcoAdd Serie Instrucciones De Servicio

Control / software
7.7.2

Open the main menu with the access code activated

Fig. 28: Calling up the main menu with an access code
1. [Open main menu] by pressing the [Menu button]
ð The screen switches to query the [access code].
2.
3. [access code] using the scroll bar
(range: A-Z, 0-9, and various special characters).
4.
Press the Next
ð The screen switches to the overview: [Main menu].
5. Use the [scrollbar] on the right-hand side of the screen to scroll to the required
setting and select it.
6. Press the
operation screen.
If you enter an incorrect access code, the locked menu item remains inactive
and is "greyed out". The menu option only becomes active and available for
selection when the access code has been entered successfully.
If the access code is no longer known, it can be reset as described in
Ä Chapter 7.10.4.2 'What can I do if I forget the access code?' on page 94.
7.8

Metering mode

Selecting a corresponding [Metering mode] ( / / / ) makes it possible to extend the
suction duration per stroke (suction stroke duration) and thus adjust the metering to high
product viscosities or challenging suction conditions.
This extension of the suction stroke duration simultaneously results in a reduction in the
max. metering output (see tables below).
417102276 Rev. 3-01.2019
The activated [access code] is shown by the padlock symbol !
button.
button to exit the [Main menu] again. The pump switches back to the
.
68