Ecolab EcoAdd Serie Instrucciones De Servicio página 337

2.
If the [access code] is activated
If the [access code] is enabled
Ä Chapter 7.7 'Main menu' on page 67.
3.
Cancel maintenance: Press the cancel key
ð The query screen is closed, maintenance mode has not been started and the
operating screen is displayed.
4.
Start maintenance: Press the OK key
ð The pump then puts the motor and the diaphragm into maintenance position.
5. A prompt screen 'Maintenance: Switch off pump!' is displayed.
6. Switch off the pump using the 'ON/OFF switch'
7. Perform the maintenance!
8. As the [access code] is still activated
If the [access code] is enabled
Ä Chapter 7.7 'Main menu' on page 67.
9. After switching the pump back on, a prompt screen 'Maintenance performed?' Is
displayed.
10. Do not confirm the maintenance work: Pressing the Cancel button
11. The notification screen 'Maintenance not completed!' is displayed. The internal
meter for the maintenance work performed (
on page 121) is not counted upwards.
After confirming this notification screen, the operating screen (pos. 14) is displayed
and the pump is ready for operation.
12. Do not confirm the maintenance work: Pressing the OK button
13. The notification screen 'Maintenance completed!' is displayed. The internal meter for
the maintenance work performed (
iscounted upwards. After confirming this notification screen, the operating screen
(pos. 14) is displayed and the pump is ready for operation.
, the [access code] is entered.
, please note the following:
.
.
.
, the [access code] must be re-entered.
, please note the following:
Ä Chapter 7.12 'Operating data'
Ä Chapter 7.12 'Operating data' on page 121)
149
Maintenance
.
.
417102276 Rev. 3-01.2019