Overview - Configuration - Ecolab EcoAdd Serie Instrucciones De Servicio

7.10

Overview - Configuration

Fig. 46: Overview: Configuration
Selection of the configuration:
1. [Call up Main menu] :
2. [Select configuration] .
ð The screen switches to the overview: [Configuration].
3. Select the configuration setting (system parameters).
4.
By pressing the
The following system parameters can be set:
Ä Chapter 7.10.1 'Pump name' on page 88
n
Ä Chapter 7.10.2 'Selecting the date/time' on page 89
n
Ä Chapter 7.10.3 'Language' on page 90
n
n Ä Chapter 7.10.4 'Access code' on page 92
Ä Chapter 7.10.5 'Unit ' on page 95
n
n Ä Chapter 7.10.6 'Autostart' on page 96
Ä Chapter 7.10.7 'Metering enable' on page 97
n
Ä Chapter 7.10.8 'Select empty signal' on page 98
n
Ä Chapter 7.10.9 'Alarm relay' on page 101
n
Ä Chapter 7.10.10 'Dosing chemical' on page 102
n
Ä Chapter 7.10.11 'Service interval' on page 106
n
Ä Chapter 7.10.12 'Select Batch' on page 108
n
Ä Chapter 7.10.13 'Container size' on page 112
n
Ä Chapter 7.10.14 'Oval gear meter' on page 113
n
Ä Chapter 7.10.15 'Diaphragm brakeage' on page 118
n
Ä Chapter 7.7 'Main menu' on page 67
button, you can return to the [Main menu].
87
Control / software
417102276 Rev. 3-01.2019