Maintenance - Ecolab EcoAdd Serie Instrucciones De Servicio

Maintenance

11 Maintenance
Personnel:
If maintenance is due, this is shown on the pump display. For more
information, see
Ä Chapter 9.5 'Confirm the pump service' on page 136.
CAUTION!
Info for authorised service personnel of the firm Ecolab
A separate service manual is available, which can be requested from the
manufacturer if you have the appropriate qualification or authorisation, or it can
be downloaded using the existing login at www.ecolab-engineering.com.
The wear and spare parts belonging to the pump type can be identified using
the pump key.
The pump key (
on the type plate (
on page 169) of the pump and in addition is also shown on the 'INFO' screen
Ä Chapter 7.2 'Start screen' on page 58) of the pump.
(
Before maintenance is carried out, the pump-specific wearing and spare parts
( Ä Chapter 12 'Consumables and spare parts' on page 157) should be
stocked up.
For all queries to the manufacturer, it is important that the designation
and the pump type are quoted correctly. This is the only way of ensuring
flawless and fast processing.
DANGER!
Damage and injuries may occur if installation, maintenance or repair
work is carried out incorrectly.
Maintenance and repair work may only be performed by authorised and trained
specialist personnel in compliance with current local regulations.
The safety regulations and required protective clothing (PPE) must be
complied with when working with chemicals. Attention must be paid to the
information included on the product data sheet of the dosing medium used.
During or prior to maintenance and repair work:
– Use only original spare parts.
– Depressurise the pressure line.
– Disconnect the dosing medium supply and clean the system thoroughly.
– Unplug the mains plug or disconnect the pump from all power sources, and
secure against accidental re-activation!
417102276 Rev. 3-01.2019
n Mechanic
n Qualified electrician
n Service personnel
Ä Chapter 7.4.1 'Symbols in operating mode' on page 64 and
Ä Chapter 14.3 'Pump key 'EcoAdd' ' on page 170) is located
Ä Chapter 14.2 'Equipment marking / Type plate'
146