Initial Installation - Harbor Breeze 40081 Manual De Usuario

INITIAL INSTALLATION

1. Turn off the circuit breakers and the wall switch to the
fan supply line leads.
DANGER: Failure to disconnect the power
supply prior to installation may result in serious injury
or death.
2. Determine the mounting method to use.
Helpful Hint: Downrod mounting is best suited for
ceilings 8 ft. or higher. For taller ceilings you may
want to use a longer downrod (not included). Angle
mounting is best suited for angled or vaulted ceilings.
A longer downrod is sometimes necessary to ensure
proper blade clearance.
Note:

Flushmount installation is not available for this
item.

Important: If using the angle mount, check to ensure
the ceiling angle is not steeper than 23°.
3. Ensure the blades (I) will be at least 30 in. from any
obstructions. Also check the downrod (A) length to
ensure the blades (I) will be at least 7 ft. above the
floor.
1
2
Downrod Mounting
Flushmount
3
A
I
7
Lowes.com/harborbreeze
Angle Mounting
Closemount
30 in.
minimum
7 ft.
minimum