Initial Installation - Harbor Breeze 40101 Manual De Instalación

INITIAL INSTALLATION

1. Turn off the circuit breakers and the wall switch to the
fan supply line leads.
DANGER: Failure to disconnect the power
supply prior to installation may result in serious injury
or death.
2. Determine the mounting method to use.

Note: Flushmount installation is not available for this
item.

Important: If using the angle mount, check to ensure
the ceiling angle is not steeper than 23°.
3. Ensure the blades (F) will be at least 30 in. from
any obstructions. Also check the downrod (A)
length to ensure the blades (F) will be at least 7 ft.
above the floor.
1
2
Downrod Mounting
Flushmount
3
A
F
Lowes.com/harborbreeze
7
Angle Mounting
Closemount
30 in. Min.
7 ft. Min.