Publicidad
1
Remove armor front.
2
Remove cylinder(s) or thumb turn if applicable.
2a
Loosen the cylinder mounting screw.
INDICATOR LOCK RETROFIT INSTRUCTIONS
2b
Remove the outside cylinder, if applicable.
Insert the key halfway into the cylinder and rotate cylinder
counterclockwise to remove.
2c
Repeat for the inside cylinder, if applicable.
2d
Remove inside or outside turns, if applicable.
3
Check door preparation.
IMPORTANT
•
To install the indicator trim, additional door preparation may
be required.
•
Please refer to the template included in this package.
•
Make sure the door is prepared with any necessary holes for
the indicator trim.
4
Complete installation of indicator trim.
Go to page 2, step 9 and follow the instructions
to complete the installation of the indicator trim.
Key inserted halfway
9
Publicidad
