Safety Information - Trix 22138 Manual Del Usuario

•The train has a technical feature in DCC operation in
which its lights will go on when the lighting function is
turned off and the train is stopped in a block.
• When using a multiprotocol digital central unit as an
operating system, this locomotive should be controlled
with DCC format. The Selectrix digital central unit
allows Selectrix format to be employed.

Safety Information

• This locomotive is only to be used with the operating
system it is designed for.
• This locomotive must not be supplied with power
simultaneously by more than one power source.
• Please make note of the safety information in the
instructions for your operating system.
The maintenance work necessary after normal operation
of this locomotive is described below. It is not necessary
to open the locomotive for service work. The manufactu-
rer warranty is automatically canceled if the locomotive is
disassembled. Please see your authorized Trix dealer for
repairs or spare parts.
In principle the pulling power for this model is limited.
The maximum grade it can negotiate with 2 to 3 twoaxle
freight cars is about 3 %.
6
No warranty or damage claims shall be accepted in those cases
where parts neither manufactured nor approved by Trix have
been installed in Trix products or where Trix products have been
converted in such a way that the non-Trix parts or the conversion
were causal to the defects and / or damage arising. The burden
of presenting evidence and the burden of proof thereof, that the
installation of non-Trix parts or the conversion in or of Trix products
was not causal to the defects and / or damage arising, is borne by
the person and/or company responsible for the installation and / or
conversion, or by the customer.