Minka Aire Artemis F803 Instrucciones De Seguridad página 10

1. Align and engage the top holes from one of the blades to the upper blade holder tabs. Carefully align the
bottom holes from the blade to the holes from the lower blade holder. Secure blade with with 3 screws, lock
washers and flat lock washers provided. Follow the same process for the remaining two blades.
2. All blade sets are grouped together by weight. Because plastic materials vary in density, the fan may wobble
even though the blades are weight matched
Fig. 11
NOTE: You must attach the blades to the motor housing after mounting the motor to the ceiling. When installing
more than one fan, ensure that the blades sets are not mixed up as each set is dynamically balanced.
1. Remove 3 screws from the mounting ring
2. Place the light kit mounting plate to the mounting ring, secure by tightening the 3 screws previously removed.
Fig. 12
BLADE INSTALLATION
INSTALLING THE MOUNTING PLATE
10