Minka Aire Artemis F803 Instrucciones De Seguridad página 5

TOOLS REQUIRED：
- Phillips / Flat head screw driver
- Pair of pliers
- Adjustable Spanner
- Step ladder
- Wire cutter
- Wiring.
The ceiling must be installed in a location so that the blades are at least 300mm spacing from the tip of the blade to
the nearest objects or walls.
Secure the hanging bracket to the ceiling joist or structure that is capable of carrying a load of at least 48KG, with
two long screws provided. Ensure at least 30mm of the screw is threaded into the support.
Fig. 1
NOTE: The bracket screw provided is for use with wooden structure only. For structures other than wood,
the appropriate screw type MUST be used.
TOOLS REQIRED
INSTALLING THE MOUNTING BRAKCET
5