Minka Aire Artemis F803 Instrucciones De Seguridad página 6

Loosen the screw in the terminal block and remove the terminal block for later use. Secure the hanger bracket to the
ceiling joist or structure using the screws included. Re-install the terminal block back to hanger bracket.
Loosen the two set screws and remove the hitch pin and lock pin from the top coupling of the motor
assembly.
Fig.3
Remove hanger ball from downrod assembly by loosening set screw, removing the cross pin, and sliding ball off rod.
Fig.4
HANGING THE FAN
INSTALLING THE FAN
6