Publicidad
| seat unit
52
[EN] Instructions for use:
I) Positioning the child in the seat unit (Fig. A-F)
Never leave the child in the seat unit without the safety harness on, even if the seat unit is outside of the car!
Press the red button to open the harness of the seat unit.
þ
Place the child into the seat unit, close the safety harness and adjust the tension.
þ
Make sure that the child is seated properly and its back rests against the seat unit.
þ
The safety harness should lay flat and firmly on the child's shoulders.
þ
Insert the two plastic hooks into the buckle together. An audible „click" confirms that they have locked into
þ
place correctly.
Tighten the front adjustment harness so that the safety harnesses of the child seat rest firmly on the
þ
child's body (harness system).
Adjusting the safety harness:
The lengths of the harnesses (harness system) must be individually adjusted to fit the child.
þ
The harnesses should be in the position closest to the child's shoulders and not twisted.
þ
You can adjust the safety harness system of the seat unit to fit the individual needs of the child in the following
manner:
a) To loosen the safety harness, press the adjustment buckle on the front side of the seat unit and simulta-
neously pull both straps of the seat unit away from it (to the front).
Publicidad
