Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
12. Put a conical tooth washer on the top 3/4" hex bolt followed by a 3/4" nylon lock nut. Put a 3/4" flat
washer on the bottom 3/4" hex bolt followed by a 3/4" nylon lock nut. Torque the 3/4" nylon lock nuts
to 380 ft-lbs.
3/4" nylon lock nut
13. Insert a spring bar with the rating stamp facing up into the trunnion. Secure with the "D" retaining pin.
BE SURE THAT THE "D" RETAINING PIN GOES THROUGH HOLE IN THE SPRING BAR.
"D" retaining pin
All Products limited to Vehicle Tow Rating, see Vehicle Owners Manual. Visit www.huskytow.com for Warranty
Information / Tech Support / Product Updates. ©2017 DTS Mfg. All Rights Reserved. April 30, 2018-Rev8
3/4" flat washer
Page
11
Spring bar
Publicidad
Tabla de contenido
