Husky 32215 Montaje, Instalación, Operación Y Mantenimiento Instrucciones página 14

17. Loosen the 5/8" dog point screws so the lift bracket can be removed from the frame bracket. Use the
1/2" carriage head bolt, flat washer, lock washer and hex nut to hold the frame brackets in place. The
bottom carriage head bolt should be in the hole closest to the underside of the trailer frame. Tighten
all (4) ½" carriage bolts to 45-55 ft.-lbs.
The frame and lift brackets can be mounted
on either the driver side or passenger side of
the trailer and MUST be mounted to the
trailer frame as shown. DO NOT mount the
frame brackets on the inside of the frame!
All Products limited to Vehicle Tow Rating, see Vehicle Owners Manual. Visit www.huskytow.com for Warranty
Information / Tech Support / Product Updates. ©2017 DTS Mfg. All Rights Reserved. April 30, 2018-Rev8
1/2" flat washer,
lock washer &
hex nut.
1/2" carriage head bolt.
Frame bracket
5/8" dog point screw.
Trailer frame
1/2" carriage
head bolt.
Frame Mounting Plate
Lift Bracket
Spring bar support surface
14
Page