Husky 32215 Montaje, Instalación, Operación Y Mantenimiento Instrucciones página 7

4. Un-screw the 5/8-11 hex bolt until the bottom of the bolt threads are flush to the inside of the channel.
5. Insert the shank into the receiver box. Hold CL TS head assembly onto shank as shown and align the
Centerline TS head so that the hitch ball is 1" above the coupler socket.
In this example, the shank will be mounted in
the Inverted position (as shown). And the
bottom 3/4" hex bolt will pass through the 2
hole from the bottom on the shank. If the
bottom 3/4" hex bolt lined up with the 2
from the top of the shank, then you would need
to flip the shank over to the Upright Position.
All Products limited to Vehicle Tow Rating, see Vehicle Owners Manual. Visit www.huskytow.com for Warranty
Information / Tech Support / Product Updates. ©2017 DTS Mfg. All Rights Reserved. April 30, 2018-Rev8
5/8-11 hex head bolt.
nd
nd hole
Ground
7
Page