Fitting And Installing The Kit - Iberspa INGROUND SPAS Manual De Instalación Y Usuario

Inground Spa Manual

3.2. FITTING AND INSTALLING THE KIT

Avoid any location in which water may enter the electrical equipment compartment.
Place the kit in a location near the Spa. The maximum distance at which the kit may be installed
with regard to the Spa is 7 metres (D
Warning: this maximum distance refers to the route of the connection pipe between the
kit and the Spa.
If it were not possible to respect these measurements, you will have to contact your supplier.
The compact kit must be below the Spa level. This avoids having to prime the pumps. The
maximum difference in level is 2 metres below (h
Spas with overflow have a balance tank, which has a double function:
Absorbing the water displaced by the people who enter the Spa.
Ensuring the filtration pump is never left without water.
To correctly install this tank, it should be placed as near as possible to the Spa, below the level
of the overflow, so that the overflow can evacuate all the water.
7m).
Fig. 21 Diagram maximum distance Spa - Kit.
Fig. 22 Diagram maximum height Spa – Kit.
21
2m).
EN