Iberspa INGROUND SPAS Manual De Instalación Y Usuario página 34

Inground Spa Manual
Heat exchanger
The thermostat does not
indicate the correct
temperature.
The water does not heat up.
*Only if your Spa has pneumatic push buttons.
6. RECYCLING AND THE ENVIRONMENT
Your Spa contains electrical and/or electronic material. When it reaches the end of its useful life,
it must be treated as special waste.
Contact your local authorities to find out about the procedure for collecting and treating waste
containing electrical and electronic material.
General massage switch on OFF.
Poorly fitted temperature probe.
Faulty temperature probe.
Faulty temperature control.
Faulty or poorly wired resistance.
Faulty or poorly connected
connector.
Thermal magnetic breaker faulty.
Exchanger switch on OFF.
Poorly wired / faulty flow meter.
Safety thermostat has detected
T>65ºC.
34
Change switch position to ON.
Fit the probe properly into its
housing.
Change the probe.
Change the control.
Check resistance wiring /
Change resistance.
Installer: Check connection
wires. Change connector.
Change thermal magnetic
breaker.
Change switch position to ON.
Check flow meter wiring /
Change flow meter.
Reset safety thermostat.
EN