Wheel Data Entry - Corghi EM 9550 Plus Manual De Uso

• activates the "partial" pro-
gramme MENU;
• if held down for at least 3 sec-
onds, it activates the "complete"
programme MENU;
• selects the setting change.
• exits the programme menu;
• saves the setting change.
• activates the static balancing
programme;
• activates the dynamic balancing
programme.
• activates the area for the manual
entry of dimensions (distance,
diameter and width).
• activates one of the seven bal-
ancing programmes for alloy
rims (ALU1P, ALU2P, ALU1, ALU2,
ALU3, ALU4, ALU5).
• shows the unbalance detected
with higher accuracy (from grx5
to grx1);
• not active in ALUP.
• activates the hidden weight pro-
gramme for hiding the weights
behind the spokes (the ALUP
programme must be active);
• activates the programme to
divide the weights on the spoke
side (the MOTORCYCLE pro-
gramme must be active).
• activates the MOTORCYCLE DY-
NAMIC balancing programme;
• activates the MOTORCYCLE ALU
balancing programme.
• starts the measuring cycle (with
wheel guard closed);
• searches for another side (with
RPA active and wheel guard
open).
• interrupts the measuring cycle;
• activates the brake for 30 seconds
when the wheel is stopped;
• if held down for at least 3 sec-
onds, it locks the automatic
wheel clamping system, allowing
the hub to be dismounted
EM 9550 Plus - EM 9550 C Plus - Operator's manual
LCD Display (fig.15)
A
"PROGRAMME MENU" AREA
B
"STATUS LINE" AREA
"UNBALANCE" AREA (unbalance extent
C
and position)
"ACTIVE OR SUGGESTED FUNCTIONS"
D
AREA

WHEEL DATA ENTRY

Wheel data entry for wheel
balancers without an
ultrasonic sensor
The machine allows for the diameter and distance
values to be entered automatically; the width
value can be entered using the keypad.
- Bring the automatic measuring arm into contact
with the inner side of the rim (fig.16).
15
UK
16
53