Assembly Instructions; Connecting/Disconnecting The Connects - Festo Tec2Screen Manual De Instrucciones

2 Assembly instructions

Warning
Assembly work must only be carried out when the power supply plug is unplugged.

2.1 Connecting/disconnecting the Connects

Caution
When connecting/disconnecting the Connects, make sure they are not forced at an angle. This can cause
damage to the connecting plug.
Connecting a Connect
Proceed as follows:
1. Depress the locking clip.
2. Insert the Connect at a right angle to the base. As soon as the locking clip is released the Connect will
automatically establish a connection with the base.
Disconnecting a Connect
Proceed as follows:
1. Depress the locking clip on the underside of the Connect.
2. If the iPad is switched on when doing this, the Connect will log off from the base.
3. Pull out the Connect in a straight line. Do not twist the Connect module when doing this!
32
© Festo Didactic 8034153