Publicidad
Problem
Receiver sound lights are blinking
and you hear fast beeping
(Out-of-Range Indicator)
Power Indicator/Low Battery
Indicator red light blinks and
you hear slow beeping
Transmitter power indicator
does not light
You hear interference from the
receiver (or on a cordless telephone
or headphone, etc.)
You do not hear any sounds
(but transmitter and receiver are
within range and receiver battery
is fully charged)
Hint: If, after checking all of these solutions, you believe that your power cords are damaged, please contact Mattel.
0125
Hereby Mattel declares that the product is in compliance with the essential requirements and other relevant
provisions of European Council Directives 99/5/EC, 89/336/EEC, 88/378/EEC. Suitable in all EU countries.
G Problems and Solutions
Loose power cord connection and transmitter power is off. Check
transmitter power cord plug-to-outlet connection.
No power to wall outlet and transmitter power is off. Make sure light
switch that controls power flow to wall outlet is on.
Power is off because circuit breaker for room is off. Make sure house
fuses and circuit breakers are on.
The signal is lost and you need to move the receiver closer to
the transmitter.
Battery needs to be recharged. Charge the battery for 6 hours. Use the
receiver in the docking station while recharging the battery.
Loose power cord connection and transmitter power is off. Check
transmitter power cord plug-to-outlet connection.
No power to wall outlet and transmitter power is off. Make sure light
switch that controls power flow to wall outlet is on.
Power is off because circuit breaker for baby's room is off. Make sure
house fuses and circuit breakers are on.
Slide the channel switch on the transmitter to the other setting.
Try resetting the monitor. Follow the instructions on page 20.
!
Solution
1
Publicidad
