Releasing Infant Carrier From Base - CYBEX gold ATON M + Manual Del Propietário

The Cybex Aton M is allowed to touch the vehicle seat(s) in front of it, as long as the recline
angle of the Aton M is not affected.

Releasing Infant Carrier from Base

If used, retract the L.S.P. (Linear Side Impact Protection) device. See page 65.
1
Push the buttons located on the top
of the load leg near the label marked
with the 1 and 2 as shown.
2
The window will show red when
the carrier has been removed
from the base.
Grasp Infant Carrier with
both hands to lift off.
1
2
1
To release carrier,
Para liberar el
2
Press and hold 1,
portabebé, mantenga
then Press 2
presionado 1 y luego
presione 2
CY_171_3835_a
2
1
To release carrier,
Para liberar el
Press and hold 1,
portabebé, mantenga
then Press 2
presionado 1 y luego
presione 2
CY_171_3835_a
53