Using The Infant Carrier With The Base; Attaching Infant Carrier To Base; Important - CYBEX gold ATON M + Manual Del Propietário

USING THE INFANT CARRIER WITH THE BASE

Attaching Infant Carrier to Base

1
Make sure handle is locked in Position A (see page
20). ALWAYS verify that the handle is LOCKED in
Position A before lifting Infant Carrier by the handle.
An unlocked handle could move unexpectedly,
causing child to fall out.
2
Lift Infant Carrier by the Handle and drop the
Carrier into the base until an audible CLICK is
heard.
ALWAYS lift up on the carrier to check that it is
securely attached to base.
3
IMPORTANT: The window on the top of the load
leg will show green when the carrier is securely
attached to the base.
ALWAYS have the handle locked in Position A
while using this child restraint in a vehicle.
ALWAYS check to ensure that the Infant Carrier
is securely attached to the Base by pulling up
on the handle.
Extend the L.S.P ( Linear Side Impact Protection)
device. ( see page 65)
52
1
2
To release carrier,
Press and hold 1,
then Press 2
3
CY_171_3835_a
CLICK!
2
Para liberar el
portabebé, mantenga
presionado 1 y luego
presione 2
1