CYBEX gold ATON M + Manual Del Propietário página 41

Squeeze the Lock-off Handle Release and lift
5
up the lock off.
Once open, Lock-off will remain open on its
own.
6
Attach both LATCH Connectors to the Lower
LATCH Anchors. Each should make an audible
CLICK when attached. Make sure they are
attached by pulling firmly on the connectors.
Push Base against vehicle seat back. Tension
the LATCH strap by pulling on the LATCH
7
Adjuster Strap to take the slack out of the
LATCH Strap, just enough to make it snug.
At this point, the LATCH strap should only be
snug as the Lock-off will tighten the system
fully.
NOTE : To store excess strap, after tightening
LATCH, place the free end of the strap flat
under the base.
NOTE: Only items approved by Cybex are
allowed under the base.
.
5
6
CLICK!
CLICK!
7
41