Removing And Storing Latch Connectors - CYBEX gold ATON M + Manual Del Propietário

REMOVING AND STORING LATCH CONNECTORS

To Remove from Storage:
To install the Base using LATCH, the
Connectors must be removed from their storage
compartments.
1
Pull on the LATCH strap release loop and pull
the connector out of the storage compartment.
Repeat on other side.
2
Lengthen the strap between the connectors using
the LATCH Strap Adjusters located next to the
connectors. Push down on the Adjuster button
while lengthening strap.
32
1
2