Access Level - Cofem ZafirCO ZCO2 Manual De Instrucciones

Leter Indication
P (Cursors)
Q ESC
R MENU
S ENTER
T (silence buzzer)
U RESET
V Display (Zones)
X Display (Concentration)
Y Display (Ventilations)
Z Display (Information)
7 Access levels.
The control panel has four access levels:

Level 1: allows manipulation of the most basic functions of the control panel such as stop
buzzer or incident revisions.
Level 2: is accessible only by responsible personnel of the installation through code entry
(27). This level allows functions related to the safety of the installation as stop alarm,
without delay, manual mode, etc.

Level 3: It is for being used by competent personnel with access code (9000), allowing full
control of the system.

Level 4: Allows access to the interior of the control panel.
Ctra. de Molins de Rei a Rubí, Km. 8,4 - 08191 RUBÍ (Barcelona) ESPAÑA.
Tlf.: +34 935 862 690 - Fax:+34 936 999 261 - cofem@cofem.com - www.cofem.com
Addressable Control Panel for CO and NO
ZafirCO
Allows movement in the menu of the display.
Allows passing to an upper level in the menu or cancel
ejecution of a menu.
Allows enter in the menu of control panel.
► Key of confirmation.
► Allow enter to the different incident displays.
Silence buzzer.
► Key for rearming events of the system.
► Pressing continuosly during more than 5 seconds,
control panel is resetted (it is necessary to introduce
access level code 2).
Display area for showing zone ventilation information.
Information line for gases concentration.
► Control panel recognizes sensor type connected in
each zone being indicated at the display (CO, NO
CO/NO ).
2
► Concentration shown is the higher concentration
between all sensor of the zone. Only in alarm mode, it is
shown instantaneous concentration between all sensor of
the zone.
► CO and NO concentration indicated in ppm.
2
Information line for ventilation status.
►ON: Ventilation output activated
►OFF: Ventilation output des-activated.
► MAN: Ventilation output activated manually and
permanent.
► In stand-by: Time and date.
► In case of alarm: It is indicated the event of Alarm CO,
Alarm NO2, or both in each zone area.
FIRE PROTECTION MANUFACTURER
2
Description
or
2
39