If you leave this mode "activation of all zones" in test mode, the control panel returns to the
previous working state by turning off the LED "D" and activating the proper functioning of the L,
M, N and O leds. This means that if any area was in test mode individually, return to this state.
Therefore, the "D" key is a hotkey that imposes its operation, but once off, returns to the
previous status.
10.7 Edit zone
Option 6 of menu 5. It is allowed to introduce label for the selected zone with a 7
characters maximum.
10.8 Leds activation
Option 4 of menu 1. It is allowed 2 options:
1) Active/Desactive permanently a led of a sensor by choosing the zone and selecting /
deselecting the sensor with the "ENTER" key.
2) Active/Desactive permanently the leds of all sensors of one zone, showing the number
of activated sensors.
The activation of the leds remain while this menu is open in the control panel.
10.9 General relays status
Option 5 of menu 1. Control panel shows in the display the status of all the relays,
allowing activation of one of them from the automatic status. In this way, it can be check
operation of all relays within maintenance tasks.
The activation of the relay remain while this menu is open in the control panel.
10.10 Other options
Time and date: It is allowed changing date and time.
Languages: In this option, language can be changed.
Password: It is allowed changing the level access 2 and level access 3
passwords. Standard control panel has level access 2: 27; and level access 3:
9000. It must be careful when changing passwords, as control panel does not
recognize previous passwords making impossible to access to specific
functions.
Ask version: It is shown the software version of control panel.
System test: This function active all control panel leds, buffer and points of
display during some seconds.
NOTE:
COFEM S.A. reserves the right to carry out changes due to typographical errors, print outs of the current information or
improvements to programmes and/or equipment at any time and without prior consent.
46
Ctra. de Molins de Rei a Rubí, Km. 8,4 - 08191 RUBÍ (Barcelona) ESPAÑA.
Tlf.: +34 935 862 690 - Fax:+34 936 999 261 - cofem@cofem.com - www.cofem.com
Addressable Control Panel for CO and NO
ZafirCO
FIRE PROTECTION MANUFACTURER
2