Timer Operation; Manual Operation - Allmand NIGHT-LITE GR Serie Manual Del Operario

Turning the Lights On
1. Unlock and open the control compartment cover.
2. Turn the circuit breaker for the chosen power inlet to
the ON position. See Preparing to Operate the Unit.
3. Select the preferred mode of operation: Timer /
Manual or Photocell. See Light Operation Mode.
4. Turn the individual light switches (A, Figure 19) (1-4)
to the ON position (if set to OFF).
Note: If the mode of operation is set to Photocell or Timer,
the lights will not turn on until dark (Photocell) or until the
time selected (Timer).
Turning the Lights Off
• If in Manual mode, turn Manual mode off. See Light
Operation Mode.
• If in Photocell or Timer mode, the lights will turn off
automatically in ambient light (Photocell) or at the
time selected (Timer).
19
Light Operation Mode
The tower lights can be controlled manually, by photocell,
or by timer.

Manual Operation

1. Turn the Photocell / Timer switch (A, Figure 20) to the
TIMER position.
2. Push the OVR button (G, Figure 21) on the timer
module to turn on Manual mode. Push again to turn
off.
Photocell Operation
Turn the Photocell / Timer switch (A, Figure 20) to the
PHOTOCELL position. The lights will automatically come
on in the absence of ambient light.
Note: For most consistent operation, avoid locating the
unit in a shadowed area, and orient the unit so the control
box faces north.
18

Timer Operation

Turn the Photocell / Timer switch (A, Figure 20) to the
TIMER position.
To set the timer:
1. Reset the timer module (first time use):
2. Set the clock:
3. Set the Timer
A
The timer can be set for seven different events. Repeat
Step 3 as needed. The number of the timer event is
displayed next to the timer ON / OFF display.
a. With a blunt object press and release the Reset
button (I, Figure 21). The timer screen (C) will
flash.
b. Press the Clock (A, Figure 21) and Hour (E)
buttons simultaneously. The time will reset to
12:00am.
a. If currently in Daylight Savings Time, press the
+1h button (H, Figure 21). (If not, bypass this
step.)
b. Press and hold the Clock button (A, Figure 21)
while simultaneously pressing the Day (D),
Hour (E) and / or Minute (F) buttons until the
correct day and time appears.
• Timer On:
• Press the Timer button (B, Figure 21)
once. ON will appear to the left of the
display.
• Press the Day button (D, Figure 21)
repeatedly to turn on or off each day the
timer will turn on.
• Press the Hour (E, Figure 21) and Minute
(F) buttons until the desired time for the
timer to turn on appears.
• Timer Off:
• Press the Timer button (B, Figure 21)
again. OFF will appear to the left of the
display.
• Press the Day button (D, Figure 21)
repeatedly to turn on or off each day the
timer will turn off.
• Press the Hour (E, Figure 21) and Minute
(F) buttons until the desired time for the
timer to turn off appears.
www.allmand.com