Removing The Drawer Support; Assembling The Drawer Support - Signature Kitchen Suite SKSCR3001P El Manual Del Propietario

Assembling the Drawer
1
Pull out the drawer support until it stops. Angle
the drawer into the space and set it on the
support.
2
Slide the drawer back until it lowers into place on
the support. Close the drawer.
CAUTION
• The drawers are heavy. Always use two hands
when removing or assembling the drawers to
avoid product damage or personal injury. Always
empty drawers before removing or assembling
them.
• Always open the refrigerator door completely
before removing or assembling the drawers.

Removing the Drawer Support

1
Press the levers on either side of the drawer
support.
2
Keeping both levers pressed, lift the drawer
support slightly and remove it from the rail
system.

Assembling the Drawer Support

1
Pull both drawer rails out until they stop.
2
Line up the bottom edges on the sides of the
drawer support with the groove in each rail and
then lower the support until it clicks into place.
OPERATION 15