Operation; Before Use - Signature Kitchen Suite SKSCF1801P Manual Del Propietário

10 OPERATION

OPERATION

Before Use

Clean the freezer.
Clean the freezer thoroughly and wipe off all dust that accumulated during shipping.
• Do not scratch the freezer with a sharp object or use a detergent that contains alcohol,
a flammable liquid or an abrasive when removing any tape or adhesive from the
freezer. Remove adhesive residue by wiping it off with your thumb or dish detergent.
• Do not peel off the model or serial number label or the technical information on the
rear surface of the freezer.
Open freezer door to ventilate the interior.
The inside of the freezer may smell like plastic at first. Remove any adhesive tape from
inside the freezer and open the freezer door for ventilation.
Connect the power supply.
Check if the power supply is connected before use.
Turn off the icemaker
Turn off the icemaker if the freezer is not yet connected to the water supply.
NOTE
• The icemaker water valve may buzz if the icemaker is turned on while the freezer is not
connected to the water supply.
Wait for the freezer to cool.
Allow the freezer to run for at least two to three hours before putting food in it. Check the
flow of cold air in the freezer to ensure proper cooling.
• Putting food in the freezer before it has cooled could cause the food to spoil, or a bad
odor to remain inside the freezer.
The freezer makes a loud noise after initial operation.
This is normal. The volume will decrease as the temperature decreases.
CAUTION
CAUTION