Parts & Features - Signature Kitchen Suite SKSCF1801P Manual Del Propietário

Parts & Features
Problem
Food packages are blocking
the door open.
Ice bin, crisper cover, pans,
shelves, door bins, or baskets
Doors will not close
are out of position.
correctly or pop
The doors were removed
open.
during product installation and
not properly replaced.
Freezer is not leveled properly.
The gaskets are dirty or sticky.
Door is difficult to
open.
Door was recently closed.
Lights do not work. LED interior lighting failure.
The interior of the The freezer is located near
freezer is covered a fire source, such as a
with dust or soot. fireplace, chimney, or candle.
Possible Cause
Rearrange food containers to clear the door and door
shelves.
Push bins all the way in and put crisper cover, pans,
shelves and baskets into their correct positions. See the
Operation section for more information.
Remove and replace the doors according to the
installation instructions.
See Door Alignment in the installation instructions to
level freezer.
Clean the gaskets and the surfaces that they touch. Rub
a thin coat of appliance polish or kitchen wax on the
gaskets after cleaning.
When you open the door, warmer air enters the freezer.
As the warm air cools, it can create a vacuum. If the door
is hard to open, wait one minute to allow the air pressure
to equalize, then see if it opens more easily.
The freezer compartment lamp is LED interior lighting,
and service should be performed by a qualified
technician.
Make sure that the freezer is not located near a fire
source, such as a fireplace, chimney or candle.
TROUBLESHOOTING
Solutions
35