Door Bins - Signature Kitchen Suite SKSCF1801P Manual Del Propietário

16 OPERATION
Removing the Drawer Support
1
Press the levers on either side of the drawer
support.
2
Keeping both levers pressed, lift the drawer
support slightly and remove it from the rail system.
Assembling the Drawer Support
1
Pull both drawer rails out until they stop.
2
Line up the bottom edges on the sides of the
drawer support with the groove in each rail and
then lower the support until it clicks into place.

Door Bins

To remove the door bins, hold the guide so that the
bin can not move and tap the bottom of the bin 2 or 3
times.
To assemble the door bin, align both sides of the bin
with the guides and push the bin down until it snaps
into place.
To adjust the location of the bin, tilt the front of the
bin up and slide the bin up or down to the desired
location.