SATA 96411 Manual Del Uso página 11

96411 / 96412
- Original torque is provided before the delivery for each wrench.
- Blow molded case has good protection performance
How to set the torque value ?
Note
Do not turn the handle when the lock ring is locked. Otherwise the adjustment device will be damaged.
First turn the lock ring to "UNLOCK" status by holding the handle with one hand and turning
1
the lock ring clockwise to the end.
Turn the handle until the " O " scale on the top of handle coincides with the center line
2
corresponding to the desired torque value.
If the required torque value is between two indicating values, continue rotating the handle until
3
the sum of the indicating values on the wrench rod and handle is equal to the required torque value.
EN DE RU KO PT JA
- 03 -
11
ES