SATA 96411 Manual Del Uso página 14

96411 / 96412
- To ensure the accuracy of SATA torque wrench, the torque wrench for the first use (test) or after long-term storage shall be
operated 5-10 times in the high torque to make the internal precision parts fully lubricated with lubricant.
- Make sure the handle is properly gripped. Hold the handle not the wrench rod, and then pull the wrench stably.
Apply the force slowly and smoothly not the impact force. The impact torque force may not only
cause the damage to torque wrench itself, and also cause the actual output torque value to
greatly exceed the set torque value, thereby damaging the nut or workpiece.
The force shall be applied by fixing the sleeve tightly and securely on the square head of wrench,
and then placing the sleeve on the fastener uprightly. While applying the force, hold the middle of
handle firmly and apply the force perpendicular to the common plane where the torque wrench,
square head, sleeve and fastener are located.
Note
When the force is increased evenly, the square head, sleeve and fastener shall be located
on the same plane (as shown in the figure) to ensure the accuracy of reading when the to
rque wrench clicks.
- 03 -
14
EN DE RU KO PT JA ES